BT Moto IAT Relocation Kit for BMW S1000RR (2019)

BT Moto IAT Relocation Kit for BMW S1000RR (2019)

The BT Moto IAT Relocation Kit for the 2019–2025 BMW S1000RR (K66/K67) is a smart bt-moto-iat-relo…bmw-s1000rr-2019/ upgrade for riders seeking more consistent engine performance. This kit helps solve the issue of heat soak and inaccurate intake air temperature (IAT) readings. Whether you’re riding in city traffic or pushing your limits at the track, this mod ensures your motorcycle delivers steady and reliable power.

---

🔧 What Is the IAT Relocation Kit?

The IAT sensor plays a critical role in how the ECU manages your engine. It reads the temperature of incoming air and helps the ECU fine-tune fuel delivery and ignition timing. In the stock setup, BMW places this sensor near the engine’s cylinder head—a location prone to heat soak.

Heat soak occurs when the sensor absorbs engine heat and gives false readings. As a result, the ECU thinks the intake air is hotter than it really is and pulls timing to prevent engine knock. This reduces power even though the engine doesn’t need that protection.

BT Moto’s relocation kit moves the sensor to the front of the bike. This new location near the intake ensures it reads true ambient air temperature. With better data, the ECU can make more accurate adjustments, improving performance in real-world conditions.

---

⚙️ What’s in the Kit?

Each kit includes two key components:

• IAT Extension Harness – Extends the original sensor connection to reach the new mounting point at the front of the bike.

• Billet Aluminum Plug – Seals off the original IAT sensor port to prevent air leaks and keep the airbox sealed.

Both components are engineered for durability and easy installation. The plug-and-play design means you don’t have to cut, splice, or modify anything permanently.

---

🚀 Performance Benefits

1. Consistent Power Delivery
With the sensor in a cooler location, the ECU makes better fueling and timing decisions. This leads to more stable power delivery across all RPMs, even in stop-and-go riding or after long idle times.

2. Better Throttle Response
Accurate temperature readings help the ECU react faster to throttle input. That means quicker acceleration and a sharper response when you open the throttle.

3. Reliable Performance in Traffic
When you’re stuck in traffic or riding at low speeds, the stock sensor can heat soak. This causes the bike to run rich and sluggish. The relocation kit helps avoid that issue entirely.

4. Dyno-Proven Gains
BT Moto tested this kit extensively on a dyno. The data showed real gains in both horsepower and torque, especially at mid to high RPMs. These gains aren’t just on paper—you’ll feel them when you ride.

---

🛠️ Installation Overview

Installing the IAT Relocation Kit is straightforward. Most riders can finish the job in about one hour using common tools. Here’s how the process breaks down:

1. Remove the Stock Sensor – Unplug and remove the IAT sensor from its original location.

2. Seal the Port – Insert the billet aluminum plug into the old sensor hole to keep the airbox sealed.

3. Install the Extension Harness – Route the harness neatly to the front intake area and plug it into the relocated sensor.

4. Secure the Sensor – Mount the sensor near the intake where it can read clean ambient air.

No drilling, cutting, or special tools are required.

---

📊 Compatibility

This kit is compatible with a wide range of modern BMW motorcycles, including:

• 2019–2025 BMW S1000RR (K66/K67)

• 2021–2025 BMW M1000RR

• 2023–2025 BMW M1000R

• 2024–2025 BMW M1000XR

• 2019–2025 BMW S1000XR

• 2021–2025 BMW S1000R

Always double-check your model year before ordering to ensure a proper fit.

---

💡 Optional Upgrades

Flapper Removal
You can pair this kit with BT Moto’s Flapper Removal Kit to reduce intake restriction. The two upgrades work well together for improved intake flow and throttle performance.

ECU Tuning
While not required, ECU tuning unlocks the full benefit of the IAT Relocation Kit. A performance flash aligns the ECU maps with the more accurate sensor data. This leads to smoother power curves and maximum gains.

---

🏁 Conclusion

The BT Moto IAT Relocation Kit is a must-have for BMW S1000RR owners looking to maximize engine performance. It fixes a known issue with the stock sensor location and delivers more accurate air temperature data to the ECU. The result? More consistent power, better throttle response, and improved riding dynamics in all conditions.

Whether you’re hitting the track, commuting daily, or riding hard in the canyons, this kit makes your bike feel sharper and more reliable. Add in its simple install process and compatibility with multiple BMW models, and it becomes one of the best value performance upgrades available.

Weight	1 kg
Dimensions	20 × 15 × 10 cm